When a garage door in Avon, CT became too heavy for the opener, we replaced the worn springs and damaged cables to get it working safely again.
Served by our Avon office in the Farmington Valley · U1 Garage Doors Avon
When a garage door opener struggles or fails to raise a door, the issue often stems from the spring and lift system rather than the opener unit itself. We recently responded to a service call in Avon, CT, where the customer contacted us after their garage door opener failed to open the door upon their arrival.
Upon inspecting the setup, our technician performed a manual check and noticed that the garage door was extremely heavy. A balanced garage door should lift easily by hand, but in this instance, the installed springs were completely worn out and failing to counteract the door's weight.
Taking a closer look at the rest of the mechanism, we also inspected the garage door cables. We found that at the primary pressure point, the cables were severely worn and almost cut entirely through. Operating a garage door with damaged cables creates a significant risk of sudden failure and door instability.
To correct these safety hazards, we offered to replace the worn components with high-quality springs and fresh garage door cables. The customer agreed to the recommended repairs. We installed the new springs and cables, restoring proper tension and balance to the entire system. With the door rebalanced and new hardware in place, the opener was able to raise and lower the door smoothly once again. If you notice your garage door becoming unusually heavy or straining your opener in Avon, CT, contact us for professional diagnosis and repair.
