U1 Garage Doors LogoU1 Garage Doors
Garage Door Opener InstallationBloomfield, CT

Garage Door Opener & Spring Replacement in Bloomfield, CT

In Bloomfield, CT, we replaced incorrect garage door springs to balance a heavy wooden door and installed a new LiftMaster 2220L chain drive opener.

Served by our Avon office in the Farmington Valley · U1 Garage Doors Avon

A LiftMaster garage door opener unit with light turned on, mounted to ceiling joists inside a garage.

We recently responded to a service call in Bloomfield, CT, where a customer was having trouble with an old Genie screw drive opener that was no longer able to lift the garage door.

Upon inspecting the garage, we found an old wooden door with windows. Checking the balance system revealed brown springs, which are designed for doors weighing 160 pounds. However, these springs were struggling to support the door. We weighed the door and found an extra 40 pounds of weight, meaning the door was significantly heavier than the springs were rated for.

We discussed options with the homeowner and offered a full door revision. The customer opted to replace the springs and replace the failing opener with a new chain-drive LiftMaster opener.

We returned the following day to complete the work. First, we replaced both springs with the correct size springs to ensure the heavy wooden door was properly balanced. After balancing the door, we removed the old Genie screw drive unit and installed a new LiftMaster 2220L chain drive opener. The door now operates smoothly and safely with its updated springs and opener system.

A steel extension spring and metal track hardware mounted near the ceiling framing inside a garage.
Garage door spring and hardware mounted along the track above a wooden door section.
An older Genie brand garage door opener motor hanging from exposed wooden rafters inside a garage.
Old Genie screw drive garage door opener unit mounted to wooden ceiling framing before replacement.